Truck Fab Posts

Mercedes Actros Catwalks, Side Skirts & Chassis Infills

SAS Welding Services transformed three new Mercedes-Benz Actros with custom fabricated Catwalks, Side Skirts and Chassis Infills. The lorry customisations were fabricated and fitted at our workshop in Glastonbury, Somerset. Made from Aluminium and fully TIG welded using only stainless nuts and bolts, with full length custom made side skirts. Custom Truck Fabrication Somerset Smart and practical, Read More…

Next Gen Scania Custom Catwalk

Check out this lovely looking 'nextgen' Scania lorry which had the SAS Welding Services treatment recently. Another truck transformed for Dave Marsland Transport, who brought his lorry to SAS Welding Services in Glastonbury due to our reputation for attention to detail and fine fabricated finishes. We fabricated a full SAS catwalk, made and fitted at Read More…

Scania Fuel Tank Repaired

Here is a Scania lorry we had in recently at SAS Welding Services in Glastonbury, Somerset. The Aluminium fuel and hydraulic tank was leaking. This needed to be repaired as quickly as possible to make it roadworthy. Our Welders got on the case to rapidly fix things for the lorry driver. Removed Repaired Refitted The Read More…

Scania R730 V8 Fitted With Custom SAS Slimfill

It was our pleasure to work on this Scania R730 V8 Guy Martin Edtion for ALM Haulage. They got a Full SAS 'slim fill' fabricated, painted and fitted from our workshop in Glastonbury, Somerset. One of our special Custom Truck Fabrication services is low profile SAS slim fills. It takes skill and craft to make Read More…

Race Truck Custom Fabricated Side Skirts

The Race truck project is now finished and gone for painting. SAS Welding Services did some Custom Truck Fabrication for MRM Racing, based in Evercreech, Somerset. They needed a Lorry to take their customer’s race cars to racing tracks and events. After discussing their requirements, we started to make their plans a reality. SAS transformed Read More…

Bull Bar Repairs

SAS Welding Services carried out Bull bar repairs this week for an international haulage company based in Yate, near Bristol. The lorry’s Bull Bars were badly damaged and in need of repair. Aluminium tubes were TIG welded in. We were able to not only repair it but to get it painted ready to go back Read More…

Slimfill – Custom Chassis Infill Somerset

SAS Welding Services recently finished a Custom Truck Fabrication job for a transport company. Custom Chassis Infill This was fitted with an SAS special slim fill. This is a custom Chassis Infill which covers from side skirt to side skirt, from the back of the cab right up to the 5th wheel. This stunning V8 Read More…

Volvo FH Custom Chassis Infill

SAS Welding Services carried out some Custom Truck Fabrication for a regular customer, this is the second truck we have done for them now. They are based in Ashcott, Somerset and highly renowned for their very clean and tidy fleet. They are regular show winners at many truck shows. Their trucks are used for work Read More…

Modified Aluminium Bull Bar

Last week SAS Welding Services carried out some Custom Truck Fabrication for a regular customer from Charlton Mackerel in Somerset. They wanted a modified Aluminium Bull Bar fitted to their Scania V8 Lorry allowing for number plate and STGO badge. This was a repair and modification job, using TIG Welding. 3mm Aluminium sheet was cut Read More…

SAS Busy at the Wessex Truck Show

We had a busy weekend when SAS Welding Services had a stand at the Wessex Truck Show, at the Yeovil Showground in Somerset. It was a great opportunity to showcase our Welding skills and meet with new customers and their families. Our stand attracted lots of visitors and it was fantastic catching up with some Read More…

Another Custom Fabricated Catwalk & Chassis Infill in Somerset

We have been busy recently with custom fabrication for lots of lorries in the build up to the Wessex Truck Fest, which is held annually and is the South West's largest truck show event. This customer from Charlton Adam in Somerset wanted a custom catwalk and chassis infill. This is a common request which gives Read More…

Custom Chassis Infill & Catwalk

We recently took on some Custom Truck Fabrication work for a customer from Frome in Somerset. They wanted SAS Welding Services to look at fabricating a custom chassis infill and catwalk. This Scania was brand new and fitted with a full catwalk from the back of the cab to the rear covering the centre of Read More…

Scania V8 Now Finished – Custom Truck Fabrication at it’s Best

Our Welders love a bit of Custom Truck Fabrication and this week we finished another Scania v8 with a custom stainless A-frame. The Stacks were made to fit and the work included a full chassis infill. Another satisfied customer and all ready for the Wessex Truck Show. Based in Glastonbury, Somerset, we specialise in Custom Read More…

Volvo FH 500 Custom Catwalk & Back Panel

SAS Welding Services completed fabrication work on a custom catwalk and back panel for this Volvo FH 500 for a customer from Ashcott in Somerset. This was to make the truck look special but still fine for everyday trucking practicalities. The lorry was on display at the Wessex Truck Show 2015. Aluminium checker plate was Read More…