Recent Projects

Fordson Tractor with MIG Welded step Somerset

Fordson Tractor MIG Welding

11th January 20175th June 2018SAS Welding ServicesMIG Welding

SAS Welding Services did some MIG Welding work on a tractor for a farmer from Meare in Somerset. It was a nice old Fordson tractor. The doorway was made bigger and a step made with a handle. It was made to fit on site, check out the before and after pictures. SAS are very popular Read More…

Trailer Repairs near Yeovil

20th December 20165th June 2018SAS Welding ServicesMIG Welding, Vehicle Repairs

SAS Welding Services were called into action for a regular customer from Podimore near Yeovil in Somerset. We carried out trailer repairs with new floor and sides. The repairs used a hard wearing grade of aluminium. SAS performed Aluminium MIG welding using the spool on gun system. The trailer had a clean finish, restoring it Read More…

Heavy Duty Drain Covers Fabricated

10th December 20165th June 2018SAS Welding ServicesFabrication, MIG Welding

SAS Welding Services were asked to custom fabricate some drain covers for a local business park in Somerset. The drain covers needed a heavy duty box section frame made to last with a galvanised finish. They are heavy duty so they can drive their cherry pickers and fork lift trucks down the pathway. They were Read More…

Volvo FH Custom Chassis Infill

4th December 20165th June 2018SAS Welding ServicesTruck Fabrication

SAS Welding Services carried out some Custom Truck Fabrication for a regular customer, this is the second truck we have done for them now. They are based in Ashcott, Somerset and highly renowned for their very clean and tidy fleet. They are regular show winners at many truck shows. Their trucks are used for work Read More…

Custom Fabricated Aluminium Inlet Manifolds

30th November 20165th June 2018SAS Welding ServicesFabrication, TIG Welding

SAS Welding Services did some custom fabrication recently for some local car enthusiasts in Glastonbury, Somerset. They both are currently doing turbo conversion on a Renault Clio Sport and a Toyota Starlet. Both required Aluminium inlet manifolds needing modifications. The turbo conversion needed our welders to carry out some Aluminium TIG Welding. The new parts Read More…

Steel Security Door Fabricated & Fitted

24th November 20165th June 2018SAS Welding ServicesFabrication, MIG Welding

SAS Welding Services were recently contacted by a customer from Glastonbury in Somerset. They needed a Steel Security Door fabricated and fitted ready for their unit at a new industrial estate, opening soon. The custom door needed to be extremely durable and secure. We fabricated the frame from PFC (Parallel Flange Channel). The fabricated door Read More…

Custom Fabricated Storage Box

11th November 20165th June 2018SAS Welding ServicesFabrication, MIG Welding

SAS Welding Services recently completed working for a customer from Wells in Somerset, fabricating a custom storage box for a roll on, roll off flat bed for moving plant machinery. The storage box was made and fitted, fully MIG welded using 3mm folded steel sheet metal. We then added angles for hanging chains on the Read More…

Water Tank TIG Welding

5th November 20165th June 2018SAS Welding ServicesTIG Welding

SAS Welding Services were asked by a local Glastonbury water factory to make modifications to a water tank. The water tank was brought to our workshop in Glastonbury, in the heart of Somerset. We shortened the legs by 100mm, to bring the tank lower to the ground. We blanked off any unneeded holes. We then Read More…

Bin Repairs Contract

22nd October 20165th June 2018SAS Welding ServicesSkip & Bin Repairs

SAS Welding Services have agreed with a customer from Wells in Somerset to service all of their Skips and Bins on a regular basis. Our Skip and Bin Repair Service is very popular with our customers as it offers excellent value for money and is a much better option than replacing them. We ensure they Read More…

Cadillac v8 Vehicle Repairs

17th October 20165th June 2018SAS Welding ServicesVehicle Repairs

SAS Welding Services were contacted by a customer from Bath who needed vehicle repairs before their MOT. This was a nice vehicle to overhaul; a Cadillac Sedan Deville v8. Due to excessive corrosion the sub frame was dropped and the rotten area was removed and replaced. MIG welding was carried out. The end result was Read More…

TIG Welded Stainless Steel Kitchen Table

14th October 20165th June 2018SAS Welding ServicesFabrication, TIG Welding

Glastonbury Town Hall needed a TIG Welder to fabricate a bespoke Food Grade Stainless Steel Kitchen Table. The table needed to be fabricated to allow the dishwasher to be at the same level as the kitchen worktops. TIG Welder Somerset We made a frame from 316 Stainless Steel Angle Iron. It was fully TIG Welded Read More…

Tipper Lorry Rear Door Repairs

7th October 20165th June 2018SAS Welding ServicesMIG Welding, Plant & Machinery Repairs

This Tipper Lorry was not fit for use, so was brought to SAS Welding Services urgently to get repaired and back on the road by a customer based in Glastonbury, Somerset. New parts were fabricated and fitted, and then worn parts were replaced. We folded up some 6mm Mild Steel brackets. We then MIG welded Read More…

Motor Bike Ramp Modification

29th September 20165th June 2018SAS Welding ServicesFabrication, MIG Welding

SAS Welding Services recently carried out a modification to this motor bike ramp for a customer from Street in Somerset. We fabricated an extension panel to extend the bike ramp allowing room for a large motor bike. We made a steel angle iron frame and then we cut and folded some steel chequer plate and Read More…

Ditching Digger Bucket Repairs

22nd September 20165th June 2018SAS Welding ServicesPlant & Machinery Repairs

SAS Welding Services carried out some plant machinery repairs on this ditching digger bucket for a customer from Meare near Glastonbury. We removed the worn out floor, cutting it out with the plasma cutter for a fast neat cut. The Plate was then cut and drilled before MIG welded in with flux core wire. Plant Read More…

Custom Bike Engine Stand

22nd September 20165th June 2018SAS Welding ServicesFabrication

SAS Welding Services did a custom fabrication job for Lee Hembury Racing based in Somerset. SAS are a sponsor of Lee Hembury Racing and we helped them out with a custom bike engine stand. We are always keen to support local talent! Lee now races all over the UK and did the Isle of Man Read More…

Heavy Digger Bucket Repairs

22nd September 20165th June 2018SAS Welding ServicesPlant & Machinery Repairs

SAS recently carried out some heavy plant machinery repairs for a customer from Haybridge, near Wells. The digger bucket was badly worn and misused and the floor was worn thin, cracked and misshaped. We used flux core wire and MIG welding to fix. The Floor was removed, cracks MIG welded, bucket and plate were then Read More…

Modified Aluminium Bull Bar

31st August 20165th June 2018SAS Welding ServicesTruck Fabrication

Last week SAS Welding Services carried out some Custom Truck Fabrication for a regular customer from Charlton Mackerel in Somerset. They wanted a modified Aluminium Bull Bar fitted to their Scania V8 Lorry allowing for number plate and STGO badge. This was a repair and modification job, using TIG Welding. 3mm Aluminium sheet was cut Read More…

Heavy Duty Mud Guards

30th August 20165th June 2018SAS Welding ServicesFabrication

We recently did some Fabrication work for a customer from Ashcott in Somerset. They called SAS Welders to fabricate some heavy duty mud guards from 2mm steel. These were fabricated from our workshop in Glastonbury, Somerset using our specialist Cutting and Folding equipment. The mud guards were made for a twin axle car trailer and Read More…

Gate Repairs in Glastonbury

30th August 20165th June 2018SAS Welding ServicesMobile Welding & Repairs

SAS Welding Services recently carried out some Gate repairs for an old property in Glastonbury, Somerset. The repairs to the gates were made using 'Stick Welding' more formally known as MMA or MMAW (manual metal arc welding) or Shielded metal Arc Welding (SMAW). Gates were removed, repaired using special cast rods and then repainted. When Read More…

Stainless Steel Kitchen Splash-back Panels

18th August 20165th June 2018SAS Welding ServicesFabrication

Today SAS Welding Services carried out some work for Glastonbury Town Hall in Somerset. They wanted some bespoke Stainless Steel splash-back panels fitted in their industrial kitchen. These splash-back panels were fabricated in house at our workshop in Glastonbury. They were cut, folded and then installed in the Town Hall kitchen. SAS Welding Services are Read More…