Category: Truck Fabrication

The cleanest and most well looked after tipper, we have had the pleasure to work on. Thanks to Tom Nutt & Son for the continued support and business. SAS Welding Services from Glastonbury fabricated new floor sheets and Tailboard shoots were fitted. Quality Fabrication in Glastonbury, Somerset We specialise in aluminium welding and fabrication and Read More…

Another Happy customer! This lovely chap popped down from Warwickshire for some Aluminium welding at our new workshop in Glastonbury, Somerset. Our reputation reaches far and wide. We managed to straighten out the original bracket and re-weld it to the front crossmember, allowing the new step to simply bolt back on. SAS specialise in aluminium Read More…

Out with the old and in with the new! This aluminium headboard for a haulage vehicle had been repaired many times (not by SAS), then it snapped in half! It was time to call SAS for a new one and get fixed properly. We used the original as a template and improved it where possible Read More…

SAS Welding Services in Glastonbury, Somerset recently fixed this smart looking Scania Tipper. It needed new tail board hinges fitted. We did all the work from our workshop in Glastonbury, Somerset on the Thomas Way Industrial Estate. It was sent back to work very quickly and they were very pleased with the outcome. Truck Repairs Read More…

A v8 Scania in for some welding repair work recently at SAS Welding Services in Glastonbury, Somerset. Dropped off on a Friday night and picked up early on the Monday morning. Lorry Fabrication Somerset We carry out Lorry repairs and custom fabrication for companies across Somerset and beyond. We are highly skilled Welders and have Read More…

This was the largest trailer we have had in the yard! From S. Morris in Somerset, we carried out custom fabrication which they were delighted with. We got it in and got the job done! The trailer was modified with a personal bridge and pop-up hand rail. SAS Welding Services are well known in the Read More…

SAS Welding Services transformed three new Mercedes-Benz Actros with custom fabricated Catwalks, Side Skirts and Chassis Infills. The lorry customisations were fabricated and fitted at our workshop in Glastonbury, Somerset. Made from Aluminium and fully TIG welded using only stainless nuts and bolts, with full length custom made side skirts. Custom Truck Fabrication Somerset Smart and practical, Read More…

Check out this lovely looking 'nextgen' Scania lorry which had the SAS Welding Services treatment recently. Another truck transformed for Dave Marsland Transport, who brought his lorry to SAS Welding Services in Glastonbury due to our reputation for attention to detail and fine fabricated finishes. We fabricated a full SAS catwalk, made and fitted at Read More…

Here is a Scania lorry we had in recently at SAS Welding Services in Glastonbury, Somerset. The Aluminium fuel and hydraulic tank was leaking. This needed to be repaired as quickly as possible to make it roadworthy. Our Welders got on the case to rapidly fix things for the lorry driver. Removed Repaired Refitted The Read More…

It was our pleasure to work on this Scania R730 V8 Guy Martin Edtion for ALM Haulage. They got a Full SAS 'slim fill' fabricated, painted and fitted from our workshop in Glastonbury, Somerset. One of our special Custom Truck Fabrication services is low profile SAS slim fills. It takes skill and craft to make Read More…

The Race truck project is now finished and gone for painting. SAS Welding Services did some Custom Truck Fabrication for MRM Racing, based in Evercreech, Somerset. They needed a Lorry to take their customer’s race cars to racing tracks and events. After discussing their requirements, we started to make their plans a reality. SAS transformed Read More…

SAS Welding Services carried out Bull bar repairs this week for an international haulage company based in Yate, near Bristol. The lorry’s Bull Bars were badly damaged and in need of repair. Aluminium tubes were TIG welded in. We were able to not only repair it but to get it painted ready to go back Read More…

SAS Welding Services recently finished a Custom Truck Fabrication job for a transport company. Custom Chassis Infill This was fitted with an SAS special slim fill. This is a custom Chassis Infill which covers from side skirt to side skirt, from the back of the cab right up to the 5th wheel. This stunning V8 Read More…

SAS Welding Services carried out some Custom Truck Fabrication for a regular customer, this is the second truck we have done for them now. They are based in Ashcott, Somerset and highly renowned for their very clean and tidy fleet. They are regular show winners at many truck shows. Their trucks are used for work Read More…

Last week SAS Welding Services carried out some Custom Truck Fabrication for a regular customer from Charlton Mackerel in Somerset. They wanted a modified Aluminium Bull Bar fitted to their Scania V8 Lorry allowing for number plate and STGO badge. This was a repair and modification job, using TIG Welding. 3mm Aluminium sheet was cut Read More…

We had a busy weekend when SAS Welding Services had a stand at the Wessex Truck Show, at the Yeovil Showground in Somerset. It was a great opportunity to showcase our Welding skills and meet with new customers and their families. Our stand attracted lots of visitors and it was fantastic catching up with some Read More…

We have been busy recently with custom fabrication for lots of lorries in the build up to the Wessex Truck Fest, which is held annually and is the South West's largest truck show event. This customer from Charlton Adam in Somerset wanted a custom catwalk and chassis infill. This is a common request which gives Read More…

We recently took on some Custom Truck Fabrication work for a customer from Frome in Somerset. They wanted SAS Welding Services to look at fabricating a custom chassis infill and catwalk. This Scania was brand new and fitted with a full catwalk from the back of the cab to the rear covering the centre of Read More…