MIG Welding Archives | SAS Welding Services

MIG Welding Tipper Body glastonbury somerset

Aluminium MIG Welding on Tipper Body

8th January 20208th January 2020SAS Welding ServicesMIG Welding, Skip & Bin Repairs

First job of the year in and out at our workshop in Glastonbury, Somerset. This aluminium tipper body was put on a roll on-roll off skip chassis before it got to us. We then had to shorten the body by removing rear door, cutting the back off and bringing it forward. The rear end was Read More…

Fabricated Work Benches, Glastonbury Somerset

Custom Fabricated Work Benches for a Race Lorry

28th January 201817th May 2018SAS Welding ServicesFabrication, MIG Welding

SAS Welding Services are well known in the Glastonbury area and across Somerset, for top notch fabrication services. We recently did a custom fabrication job for a customer from Evercreech, near Shepton Mallet in Somerset. Our fabrication team were asked to fabricate custom work benches for the back of a race lorry. They will be Read More…

Fordson Tractor with MIG Welded step Somerset

Fordson Tractor MIG Welding

11th January 20175th June 2018SAS Welding ServicesMIG Welding

SAS Welding Services did some MIG Welding work on a tractor for a farmer from Meare in Somerset. It was a nice old Fordson tractor. The doorway was made bigger and a step made with a handle. It was made to fit on site, check out the before and after pictures. SAS are very popular Read More…

Trailer Repairs near Yeovil

20th December 20165th June 2018SAS Welding ServicesMIG Welding, Vehicle Repairs

SAS Welding Services were called into action for a regular customer from Podimore near Yeovil in Somerset. We carried out trailer repairs with new floor and sides. The repairs used a hard wearing grade of aluminium. SAS performed Aluminium MIG welding using the spool on gun system. The trailer had a clean finish, restoring it Read More…

Heavy Duty Drain Covers Fabricated

10th December 20165th June 2018SAS Welding ServicesFabrication, MIG Welding

SAS Welding Services were asked to custom fabricate some drain covers for a local business park in Somerset. The drain covers needed a heavy duty box section frame made to last with a galvanised finish. They are heavy duty so they can drive their cherry pickers and fork lift trucks down the pathway. They were Read More…

Steel Security Door Fabricated & Fitted

24th November 20165th June 2018SAS Welding ServicesFabrication, MIG Welding

SAS Welding Services were recently contacted by a customer from Glastonbury in Somerset. They needed a Steel Security Door fabricated and fitted ready for their unit at a new industrial estate, opening soon. The custom door needed to be extremely durable and secure. We fabricated the frame from PFC (Parallel Flange Channel). The fabricated door Read More…

Custom Fabricated Storage Box

11th November 20165th June 2018SAS Welding ServicesFabrication, MIG Welding

SAS Welding Services recently completed working for a customer from Wells in Somerset, fabricating a custom storage box for a roll on, roll off flat bed for moving plant machinery. The storage box was made and fitted, fully MIG welded using 3mm folded steel sheet metal. We then added angles for hanging chains on the Read More…

Tipper Lorry Rear Door Repairs

7th October 20165th June 2018SAS Welding ServicesMIG Welding, Plant & Machinery Repairs

This Tipper Lorry was not fit for use, so was brought to SAS Welding Services urgently to get repaired and back on the road by a customer based in Glastonbury, Somerset. New parts were fabricated and fitted, and then worn parts were replaced. We folded up some 6mm Mild Steel brackets. We then MIG welded Read More…

Motor Bike Ramp Modification

29th September 20165th June 2018SAS Welding ServicesFabrication, MIG Welding

SAS Welding Services recently carried out a modification to this motor bike ramp for a customer from Street in Somerset. We fabricated an extension panel to extend the bike ramp allowing room for a large motor bike. We made a steel angle iron frame and then we cut and folded some steel chequer plate and Read More…

CCTV Poles Fabricated to Specification

18th August 20165th June 2018SAS Welding ServicesFabrication, MIG Welding

We recently were asked to fabricate some mild steel poles for CCTV cameras for a customer from Wells, Somerset. MIG Welders Somerset These poles were made to customers drawings and specifications. They were fabricated from mild steel then fully MIG Welded in less than a day. The poles were then sent for galvanising. These CCTV Read More…